INJECTION MOLDING ENCYCLOPEDIA
Injection Molding Encyclopedia
Find hot runner articles by industry, material, and molding defect.
Frequently Asked Questions
Find products by material
View all four productsTotal 194 articles · Current:All industries
Browse by defect, material, and industry
194 articles
PA6T Drooling: Material Carryover After Color Change
PA6T drooling typically occurs in the first few shots after stoppage, color change, or purging. Grivory HT1 (PA6T/6I) specs: melt 330–340°C, mold temp ≥140°C; high temperatures cause slow outlet cooling and prolonged seepage. Details timeline judgment, differences in residue films compared to PA46 and PA9T, and proper changeover/purge sequences.
PA6T Nozzle Clogging at Small Gates: Mold Temp 140°C Analysis
PA6T clogging stems from cold caps, glass fiber bridging, or carbonization, requiring distinct solutions. Grivory HT1 (PA6T/6I) specs: melt 330–340°C, mold temp ≥140°C, creating a 190–200°C differential and narrow processing window. Provides qualitative methods based on shape, location, and time, along with treatment sequences.
PEI Stringing: Why Cooling Alone Doesn't Prevent Breakage
As an amorphous material with a Tg of 217°C and no melting plateau, PEI viscosity increases continuously during cooling, leading to long strings that break sharply. ULTEM 1010 specifications: melt temperature 350–410°C, nozzle temperature 345–405°C, mold temperature 135–180°C, and drying at 150°C for 4–6 hours. This explains why valve pin timing—not just cooling—is required to prevent stringing.
PEI Drooling on Stop: Handling Amorphous Materials
PEI lacks a melting plateau; viscosity rises continuously as outlet temperature drops after stoppage, causing film formation within 10 minutes. ULTEM 1010 specs: melt 350–410°C, mold temp 135–180°C, drying 150°C for 4–6 hours, moisture <0.02%. This article categorizes drooling into residual heat leakage and excessive moisture, providing stop procedures.
Is PEI Nozzle Clogging Due to High Viscosity or Material Degradation?
PEI is a high-viscosity material; clogging often results from viscosity and degradation occurring sequentially. ULTEM 1010 official melt temp 350–410°C, mold temp 135–180°C; prolonged residence causes degradation, unlike PPS where viscosity does not increase significantly with long residence. This article qualitatively assesses position, color, odor, and time, and provides processing sequences for residence time and production scheduling.
What Specific Temperature Range Does PA46 Address in Automotive Connectors?
PA46 (Stanyl TS250F6D, 30% GF): Melting point 295°C; melt temp must exceed 305°C, optimal 305–320°C; shrinkage 0.4%/1.1%, with directional difference near triple. This article explains PA46 implementation for automotive connectors via temperature segmentation, gate types, shrinkage orientation, and trial mold validation sequences, noting why only SD Series is recommended for this material group.
Why Choose PA46 for Thin-Walled Consumer Electronics Parts?
PA46 (Stanyl TS250F6D, 30% GF) has good flowability and fast crystallization, suitable for single-shot molding of 0.4mm thin walls, but melt temp limit is 320°C and directional shrinkage difference is nearly triple. This article discusses injection speed staging, weld line location, SD Series gate selection, and dimensional stability, providing an actionable judgment sequence.
When Choosing PA46 for Industrial Connectors, Is Temperature Resistance or Dimensional Stability More Critical?
PA46 (Stanyl TS250F6D, 30% GF): Melting point 295°C, melt temp 305–320°C, shrinkage 0.4%/1.1%. The real challenges for industrial connectors are long-term heating under current, damp-heat moisture absorption, and dimensional drift due to crystallization stability. This article covers gate location, validation timepoints, and vent handling sequences.
How Many Sterilization Cycles Can PA46 Withstand for Medical Parts?
For medical parts, define sterilization method, temperature, single-cycle duration, and total cycles before discussing materials. Select hydrolysis-resistant PA46 grades; melt temp 305–320°C, shrinkage 0.4%/1.1%. This article presents the four-timepoint validation method, cleanliness advantages of SD Series gates, and purge requirements for small-batch production.
For High-Voltage Connectors Using PA46, Which Limits First: Insulation or Temperature Resistance?
As voltage platforms rise to 800V, electric field strength doubles for the same creepage distance; insulation often limits performance before temperature resistance. PA46: Melting point 295°C, melt temp 305–320°C, shrinkage 0.4%/1.1%; usable but with boundaries. This article explains trade-offs via temperature lines, insulation lines, SD Series gates, and damp-heat validation sequences.
Can't find the matching gate issue? Share material, part, and defect details. Our engineers will evaluate it by part.
Online selection and quote