MATERIAL TOPIC
PEEK
PEEK operates at high temperatures; the hot runner requires stable zoned control and heat-resistant construction.
0 articles
Articles in this topic
View all articlesTemperature Control Issues and Runaway: Thermocouples, Zones, and Power
Symptoms include consistent short shots or yellowing despite correct setpoints, or temperature fluctuations synchronized with mold opening and closing. These indicate circuit issues rather than simple offset errors.
Why Constant-Temperature Hot Runners Cause Stringing, Drooling, and Clogging
Stringing, drooling, and clogging may appear to be machine-setting issues, but a constant-temperature gate remains molten throughout the entire cycle. This article explains how each defect forms, how FHFC freezes the gate before opening, and why lowering the temperature or shortening the packing time only addresses symptoms.
Can't find the matching defect? Share photos of the resin, shot weight, and gate for a review against the actual structure.
Online selection and quote