INJECTION MOLDING ENCYCLOPEDIA
Injection Molding Encyclopedia
Find hot runner articles by industry, material, and molding defect.
Frequently Asked Questions
Find products by material
View all four productsTotal 194 articles · Current:All industries
Browse by defect, material, and industry
194 articles
Sterilization Trays: Switching from Stainless Steel to PEI
Stainless steel is heavy, opaque, and scratches instruments. PEI is light, transparent, and non-scratching. 134°C is well below PEI’s Tg of 217°C, providing margin; PC’s Tg (~150°C) leads to haze and cracking under repeated sterilization. ULTEM 1010: mold temp 135–180°C, drying 150°C × 4–6h, moisture ≤0.02%. Transparent parts require dedicated machines and materials.
Infusion Connectors: Why PPS Over PC or ABS
Connectors contact drug solutions; leachables and adsorption are checked against customer lists. Reusable parts undergo repeated stringing/disinfection; PC suffers stress cracking, and ABS lacks sufficient heat resistance. PPS 40%GF shrinkage is 0.3%/0.8%; rotational parts need symmetrical gates and 150°C mold temperature for roundness. Disposable parts use PC/ABS for lower cost.
Instrument Handles for High-Temp Sterilization: Why PA46?
Handles transmit force and torque. PA46 TS250F6D (30%GF) provides ~200MPa tensile strength, but glass reinforcement reduces impact resistance; drop-prone areas need fillets and thickening. For 134°C steam, wet-heat aging is critical, not just temperature; validation requires mechanical re-testing after sterilization cycles. Dimensions change with water absorption; fits must be calculated for wet state.
PV Connectors: Why PA9T Withstands 25-Year Outdoor Exposure
Four challenges for 25-year outdoor use: UV chain scission, hydrolysis, thermal displacement, and DC high-voltage tracking. PA9T’s water absorption of 0.19% is an order of magnitude lower than PA66, making it suitable for PV applications; outdoor parts require checking strength retention after xenon lamp aging. Drying conditions: 70–90°C × 4–8h, moisture ≤0.20%.
ESS Battery Module Insulators: Why Electrolyte Resistance Matters
Design input is failure mode (cell leakage) rather than normal operation; electrolytes are highly corrosive, and perforated insulators cause short circuits. PPS offers electrolyte resistance, self-extinguishing properties via sulfur content, and halogen-free composition. 40%GF shrinkage is 0.3%/0.8%; long separators require zoned mold temperature control. Validation involves soaking in actual electrolyte at 60°C for hundreds of hours to measure weight, dimensions, strength, and insulation resistance.
PEEK for Hydrogen System and Flow Battery Pumps/Valves
Fuel cell membranes are sensitive to metal ions; PEEK is halogen-free and lacks metal stabilizers, with leaching verified by deionized water soaking. Strong acids in flow batteries require immersion and permeation testing in the actual medium. Pump shaft bearings need paired Ra <0.4; dry friction during startup requires lubricant-filled grades. FHFC nozzle tip: 395°C, mold temperature 170–200°C.
Constant Temperature vs. Fast Heat Fast Cool Hot Runners: Key Differences
Both systems use similar melt delivery concepts; the difference lies at the gate. Constant temperature relies on passive freezing with an uncontrolled location and shape. Fast Heat Fast Cool forces gate freezing at the end of packing, resulting in low residual stress and clean demolding. Stringing and drooling occur when the gate is semi-frozen. Fast Heat Fast Cool nozzles require low thermal inertia and short heating zones.
Why Constant-Temperature Hot Runners Tend to String and Drip
Stringing and drooling result from the gate failing to freeze completely, dragging melt along. Constant temperature systems continue heating; during cooling, the gate still warms up. Lowering melt/mold temperature or extending cooling time only shifts the balance. LCP’s low viscosity and PA46’s narrow 15°C processing window further restrict options. Validation must cover stop-start cycles, color/material changes, and mold temperature fluctuations.
Hot Nozzle Structure: Function of Each Segment
Nozzle tip controls gate closure and cutoff; Ø14mm OD corresponds to mold mounting hole. Runner tube prevents freezing, stagnation, and degradation; diameter and roughness depend on material. Heater ensures uniformity and controllability; thermocouples must be placed at critical control points. These three segments couple; troubleshooting order: tip, then runner, then heater. Thermal expansion is absorbed structurally; cold-state gaps calculated based on temperature rise.
Manifold Temperature Inconsistency Leading to Part Defects
Manifolds distribute both flow and heat. Temperature inconsistencies arise from path length differences, heater placement, and edge heat loss. Hotter paths yield larger/heavier parts; colder paths yield smaller parts or short shots. Flash, sink marks, color variation, and gate marks may result. Solutions include zoned heating, thermal isolation, and runner geometry compensation. Verification uses temperature maps and weight distribution analysis.
Can't find the matching gate issue? Share material, part, and defect details. Our engineers will evaluate it by part.
Online selection and quote