INJECTION MOLDING ENCYCLOPEDIA
Injection Molding Encyclopedia
Find hot runner articles by industry, material, and molding defect.
Frequently Asked Questions
Find products by material
View all four productsTotal 84 articles · Current:All industries
Browse by defect, material, and industry
84 articles
FHFC vs. Standard Hot Runner: Comparing Cost Differences
An FHFC hot runner requires more investment than a conventional constant-temperature system, but the difference cannot be reduced to a single figure. The decision requires assessing both additional cost and measurable returns. This article outlines the cost structure, benefit sources and evaluation method; it does not replace a project quotation.
Stringing, Drooling, and Clogging: Differences, Causes, and Solutions
In high-temperature molding, stringing, drooling, and clogging are often grouped as gate defects, but their symptoms, causes, and adjustments differ. Changing a single parameter without first identifying the defect type may resolve one issue while worsening another.
Gate Defects in High-Temperature Molding: Why Machine Settings Provide Only Partial Relief
In LCP, PA6T, PA9T, and PPS molding, common gate defects include stringing, drooling, and nozzle clogging. While shops typically adjust temperature, injection speed, and packing time, improvements are often short-lived. The root cause lies not just in parameters: a constant-temperature hot runner must compromise across all three stages of the molding cycle.
Why Constant-Temperature Hot Runners Cause Stringing, Drooling, and Clogging
Stringing, drooling, and clogging may appear to be machine-setting issues, but a constant-temperature gate remains molten throughout the entire cycle. This article explains how each defect forms, how FHFC freezes the gate before opening, and why lowering the temperature or shortening the packing time only addresses symptoms.
Why LCP Gates Are Highly Susceptible to Defects
LCP is difficult to mold not because of machine setup challenges, but because the gate operates between high temperatures and thermal degradation. High processing temperatures, low melt viscosity, thermal sensitivity, and tight precision connector requirements combine to cause stringing, drooling, and clogging. This article explains the four root causes and how dynamic gate temperature control optimizes timing.
FHFC Hot Runner vs. Mold Fast Heat, Fast Cool: What's the Difference?
Though both share a name, their scope differs. Mold RHCM adjusts the entire cavity temperature to improve surface finish. In contrast, FHFC hot runners heat only the gate area to prevent stringing, drooling, and clogging. This article compares their operating range, equipment, cost, cycle impact, and selection criteria.
Why We Recommend the SD Series and When to Use a Valve Gate
For precision connector production, an SD Series nozzle paired with dynamic gate temperature control is typically the first choice. Valve Gate systems remain essential for demanding gate aesthetics, surface gating, independent multi-cavity control, and specific materials. This article outlines the four nozzle types and the recommended selection order.
FHFC Hot Runner Cost Savings and Yield Improvement for Factories
FHFC benefits extend beyond gate appearance to four production costs: yield, downtime, labor, and consumables. This article calculates hidden costs of constant-temperature solutions, breaks down full-cycle accounts using precision connector mass production cases, lists unsuitable scenarios and misconceptions, and explains why procurement quotes often diverge from total cost.
Core Principles and Technical Comparison: Constant-Temp vs. FHFC Hot Runners
Constant-temperature hot runners maintain uniform high heat throughout the cycle, relying on material flowability and gate structure to manage defects. FHFC heats before filling and cools before sealing, trading gate temperature timing for a wider molding window. This article compares control logic, operational advantages, and material compatibility, providing a selection decision order.
Ultimate Hot Runner Selection Guide: Constant Temp vs FHFC (Factory Comparison)
This final installment converts previous comparisons into actionable selection criteria: first assess material heat resistance and shear sensitivity, then product precision and cosmetic requirements, finally batch size and cycle time. It provides decision tables for material, precision, and mass production scenarios, highlighting three common factory selection mistakes.
Can't find the matching gate issue? Share material, part, and defect details. Our engineers will evaluate it by part.
Online selection and quote